home *** CD-ROM | disk | FTP | other *** search
/ Aminet 38 / Aminet 38 (2000)(Schatztruhe)[!][Aug 2000].iso / Aminet / util / arc / bzip2_src.lha / bzip2-1.0.0 / bzlib.c < prev    next >
Encoding:
C/C++ Source or Header  |  2000-04-06  |  44.3 KB  |  1,565 lines

  1.  
  2. /*-------------------------------------------------------------*/
  3. /*--- Library top-level functions.                          ---*/
  4. /*---                                               bzlib.c ---*/
  5. /*-------------------------------------------------------------*/
  6.  
  7. /*--
  8.   This file is a part of bzip2 and/or libbzip2, a program and
  9.   library for lossless, block-sorting data compression.
  10.  
  11.   Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
  12.  
  13.   Redistribution and use in source and binary forms, with or without
  14.   modification, are permitted provided that the following conditions
  15.   are met:
  16.  
  17.   1. Redistributions of source code must retain the above copyright
  18.      notice, this list of conditions and the following disclaimer.
  19.  
  20.   2. The origin of this software must not be misrepresented; you must 
  21.      not claim that you wrote the original software.  If you use this 
  22.      software in a product, an acknowledgment in the product 
  23.      documentation would be appreciated but is not required.
  24.  
  25.   3. Altered source versions must be plainly marked as such, and must
  26.      not be misrepresented as being the original software.
  27.  
  28.   4. The name of the author may not be used to endorse or promote 
  29.      products derived from this software without specific prior written 
  30.      permission.
  31.  
  32.   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  33.   OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  34.   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  35.   ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  36.   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37.   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  38.   GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  39.   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  40.   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  41.   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  42.   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  43.  
  44.   Julian Seward, Cambridge, UK.
  45.   jseward@acm.org
  46.   bzip2/libbzip2 version 1.0 of 21 March 2000
  47.  
  48.   This program is based on (at least) the work of:
  49.      Mike Burrows
  50.      David Wheeler
  51.      Peter Fenwick
  52.      Alistair Moffat
  53.      Radford Neal
  54.      Ian H. Witten
  55.      Robert Sedgewick
  56.      Jon L. Bentley
  57.  
  58.   For more information on these sources, see the manual.
  59. --*/
  60.  
  61. /*--
  62.    CHANGES
  63.    ~~~~~~~
  64.    0.9.0 -- original version.
  65.  
  66.    0.9.0a/b -- no changes in this file.
  67.  
  68.    0.9.0c
  69.       * made zero-length BZ_FLUSH work correctly in bzCompress().
  70.       * fixed bzWrite/bzRead to ignore zero-length requests.
  71.       * fixed bzread to correctly handle read requests after EOF.
  72.       * wrong parameter order in call to bzDecompressInit in
  73.         bzBuffToBuffDecompress.  Fixed.
  74. --*/
  75.  
  76. #include "bzlib_private.h"
  77.  
  78.  
  79. /*---------------------------------------------------*/
  80. /*--- Compression stuff                           ---*/
  81. /*---------------------------------------------------*/
  82.  
  83.  
  84. /*---------------------------------------------------*/
  85. #ifndef BZ_NO_STDIO
  86. void BZ2_bz__AssertH__fail ( int errcode )
  87. {
  88.    fprintf(stderr, 
  89.       "\n\nbzip2/libbzip2: internal error number %d.\n"
  90.       "This is a bug in bzip2/libbzip2, %s.\n"
  91.       "Please report it to me at: jseward@acm.org.  If this happened\n"
  92.       "when you were using some program which uses libbzip2 as a\n"
  93.       "component, you should also report this bug to the author(s)\n"
  94.       "of that program.  Please make an effort to report this bug;\n"
  95.       "timely and accurate bug reports eventually lead to higher\n"
  96.       "quality software.  Thanks.  Julian Seward, 21 March 2000.\n\n",
  97.       errcode,
  98.       BZ2_bzlibVersion()
  99.    );
  100.    exit(3);
  101. }
  102. #endif
  103.  
  104.  
  105. /*---------------------------------------------------*/
  106. static
  107. int bz_config_ok ( void )
  108. {
  109.    if (sizeof(int)   != 4) return 0;
  110.    if (sizeof(short) != 2) return 0;
  111.    if (sizeof(char)  != 1) return 0;
  112.    return 1;
  113. }
  114.  
  115.  
  116. /*---------------------------------------------------*/
  117. static
  118. void* default_bzalloc ( void* opaque, Int32 items, Int32 size )
  119. {
  120.    void* v = malloc ( items * size );
  121.    return v;
  122. }
  123.  
  124. static
  125. void default_bzfree ( void* opaque, void* addr )
  126. {
  127.    if (addr != NULL) free ( addr );
  128. }
  129.  
  130.  
  131. /*---------------------------------------------------*/
  132. static
  133. void prepare_new_block ( EState* s )
  134. {
  135.    Int32 i;
  136.    s->nblock = 0;
  137.    s->numZ = 0;
  138.    s->state_out_pos = 0;
  139.    BZ_INITIALISE_CRC ( s->blockCRC );
  140.    for (i = 0; i < 256; i++) s->inUse[i] = False;
  141.    s->blockNo++;
  142. }
  143.  
  144.  
  145. /*---------------------------------------------------*/
  146. static
  147. void init_RL ( EState* s )
  148. {
  149.    s->state_in_ch  = 256;
  150.    s->state_in_len = 0;
  151. }
  152.  
  153.  
  154. static
  155. Bool isempty_RL ( EState* s )
  156. {
  157.    if (s->state_in_ch < 256 && s->state_in_len > 0)
  158.       return False; else
  159.       return True;
  160. }
  161.  
  162.  
  163. /*---------------------------------------------------*/
  164. int BZ_API(BZ2_bzCompressInit) 
  165.                     ( bz_stream* strm, 
  166.                      int        blockSize100k,
  167.                      int        verbosity,
  168.                      int        workFactor )
  169. {
  170.    Int32   n;
  171.    EState* s;
  172.  
  173.    if (!bz_config_ok()) return BZ_CONFIG_ERROR;
  174.  
  175.    if (strm == NULL || 
  176.        blockSize100k < 1 || blockSize100k > 9 ||
  177.        workFactor < 0 || workFactor > 250)
  178.      return BZ_PARAM_ERROR;
  179.  
  180.    if (workFactor == 0) workFactor = 30;
  181.    if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
  182.    if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
  183.  
  184.    s = BZALLOC( sizeof(EState) );
  185.    if (s == NULL) return BZ_MEM_ERROR;
  186.    s->strm = strm;
  187.  
  188.    s->arr1 = NULL;
  189.    s->arr2 = NULL;
  190.    s->ftab = NULL;
  191.  
  192.    n       = 100000 * blockSize100k;
  193.    s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
  194.    s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
  195.    s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
  196.  
  197.    if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
  198.       if (s->arr1 != NULL) BZFREE(s->arr1);
  199.       if (s->arr2 != NULL) BZFREE(s->arr2);
  200.       if (s->ftab != NULL) BZFREE(s->ftab);
  201.       if (s       != NULL) BZFREE(s);
  202.       return BZ_MEM_ERROR;
  203.    }
  204.  
  205.    s->blockNo           = 0;
  206.    s->state             = BZ_S_INPUT;
  207.    s->mode              = BZ_M_RUNNING;
  208.    s->combinedCRC       = 0;
  209.    s->blockSize100k     = blockSize100k;
  210.    s->nblockMAX         = 100000 * blockSize100k - 19;
  211.    s->verbosity         = verbosity;
  212.    s->workFactor        = workFactor;
  213.  
  214.    s->block             = (UChar*)s->arr2;
  215.    s->mtfv              = (UInt16*)s->arr1;
  216.    s->zbits             = NULL;
  217.    s->ptr               = (UInt32*)s->arr1;
  218.  
  219.    strm->state          = s;
  220.    strm->total_in_lo32  = 0;
  221.    strm->total_in_hi32  = 0;
  222.    strm->total_out_lo32 = 0;
  223.    strm->total_out_hi32 = 0;
  224.    init_RL ( s );
  225.    prepare_new_block ( s );
  226.    return BZ_OK;
  227. }
  228.  
  229.  
  230. /*---------------------------------------------------*/
  231. static
  232. void add_pair_to_block ( EState* s )
  233. {
  234.    Int32 i;
  235.    UChar ch = (UChar)(s->state_in_ch);
  236.    for (i = 0; i < s->state_in_len; i++) {
  237.       BZ_UPDATE_CRC( s->blockCRC, ch );
  238.    }
  239.    s->inUse[s->state_in_ch] = True;
  240.    switch (s->state_in_len) {
  241.       case 1:
  242.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  243.          break;
  244.       case 2:
  245.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  246.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  247.          break;
  248.       case 3:
  249.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  250.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  251.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  252.          break;
  253.       default:
  254.          s->inUse[s->state_in_len-4] = True;
  255.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  256.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  257.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  258.          s->block[s->nblock] = (UChar)ch; s->nblock++;
  259.          s->block[s->nblock] = ((UChar)(s->state_in_len-4));
  260.          s->nblock++;
  261.          break;
  262.    }
  263. }
  264.  
  265.  
  266. /*---------------------------------------------------*/
  267. static
  268. void flush_RL ( EState* s )
  269. {
  270.    if (s->state_in_ch < 256) add_pair_to_block ( s );
  271.    init_RL ( s );
  272. }
  273.  
  274.  
  275. /*---------------------------------------------------*/
  276. #define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
  277. {                                                 \
  278.    UInt32 zchh = (UInt32)(zchh0);                 \
  279.    /*-- fast track the common case --*/           \
  280.    if (zchh != zs->state_in_ch &&                 \
  281.        zs->state_in_len == 1) {                   \
  282.       UChar ch = (UChar)(zs->state_in_ch);        \
  283.       BZ_UPDATE_CRC( zs->blockCRC, ch );          \
  284.       zs->inUse[zs->state_in_ch] = True;          \
  285.       zs->block[zs->nblock] = (UChar)ch;          \
  286.       zs->nblock++;                               \
  287.       zs->state_in_ch = zchh;                     \
  288.    }                                              \
  289.    else                                           \
  290.    /*-- general, uncommon cases --*/              \
  291.    if (zchh != zs->state_in_ch ||                 \
  292.       zs->state_in_len == 255) {                  \
  293.       if (zs->state_in_ch < 256)                  \
  294.          add_pair_to_block ( zs );                \
  295.       zs->state_in_ch = zchh;                     \
  296.       zs->state_in_len = 1;                       \
  297.    } else {                                       \
  298.       zs->state_in_len++;                         \
  299.    }                                              \
  300. }
  301.  
  302.  
  303. /*---------------------------------------------------*/
  304. static
  305. Bool copy_input_until_stop ( EState* s )
  306. {
  307.    Bool progress_in = False;
  308.  
  309.    if (s->mode == BZ_M_RUNNING) {
  310.  
  311.       /*-- fast track the common case --*/
  312.       while (True) {
  313.          /*-- block full? --*/
  314.          if (s->nblock >= s->nblockMAX) break;
  315.          /*-- no input? --*/
  316.          if (s->strm->avail_in == 0) break;
  317.          progress_in = True;
  318.          ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
  319.          s->strm->next_in++;
  320.          s->strm->avail_in--;
  321.          s->strm->total_in_lo32++;
  322.          if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
  323.       }
  324.  
  325.    } else {
  326.  
  327.       /*-- general, uncommon case --*/
  328.       while (True) {
  329.          /*-- block full? --*/
  330.          if (s->nblock >= s->nblockMAX) break;
  331.          /*-- no input? --*/
  332.          if (s->strm->avail_in == 0) break;
  333.          /*-- flush/finish end? --*/
  334.          if (s->avail_in_expect == 0) break;
  335.          progress_in = True;
  336.          ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
  337.          s->strm->next_in++;
  338.          s->strm->avail_in--;
  339.          s->strm->total_in_lo32++;
  340.          if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
  341.          s->avail_in_expect--;
  342.       }
  343.    }
  344.    return progress_in;
  345. }
  346.  
  347.  
  348. /*---------------------------------------------------*/
  349. static
  350. Bool copy_output_until_stop ( EState* s )
  351. {
  352.    Bool progress_out = False;
  353.  
  354.    while (True) {
  355.  
  356.       /*-- no output space? --*/
  357.       if (s->strm->avail_out == 0) break;
  358.  
  359.       /*-- block done? --*/
  360.       if (s->state_out_pos >= s->numZ) break;
  361.  
  362.       progress_out = True;
  363.       *(s->strm->next_out) = s->zbits[s->state_out_pos];
  364.       s->state_out_pos++;
  365.       s->strm->avail_out--;
  366.       s->strm->next_out++;
  367.       s->strm->total_out_lo32++;
  368.       if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
  369.    }
  370.  
  371.    return progress_out;
  372. }
  373.  
  374.  
  375. /*---------------------------------------------------*/
  376. static
  377. Bool handle_compress ( bz_stream* strm )
  378. {
  379.    Bool progress_in  = False;
  380.    Bool progress_out = False;
  381.    EState* s = strm->state;
  382.    
  383.    while (True) {
  384.  
  385.       if (s->state == BZ_S_OUTPUT) {
  386.          progress_out |= copy_output_until_stop ( s );
  387.          if (s->state_out_pos < s->numZ) break;
  388.          if (s->mode == BZ_M_FINISHING && 
  389.              s->avail_in_expect == 0 &&
  390.              isempty_RL(s)) break;
  391.          prepare_new_block ( s );
  392.          s->state = BZ_S_INPUT;
  393.          if (s->mode == BZ_M_FLUSHING && 
  394.              s->avail_in_expect == 0 &&
  395.              isempty_RL(s)) break;
  396.       }
  397.  
  398.       if (s->state == BZ_S_INPUT) {
  399.          progress_in |= copy_input_until_stop ( s );
  400.          if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
  401.             flush_RL ( s );
  402.             BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
  403.             s->state = BZ_S_OUTPUT;
  404.          }
  405.          else
  406.          if (s->nblock >= s->nblockMAX) {
  407.             BZ2_compressBlock ( s, False );
  408.             s->state = BZ_S_OUTPUT;
  409.          }
  410.          else
  411.          if (s->strm->avail_in == 0) {
  412.             break;
  413.          }
  414.       }
  415.  
  416.    }
  417.  
  418.    return progress_in || progress_out;
  419. }
  420.  
  421.  
  422. /*---------------------------------------------------*/
  423. int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
  424. {
  425.    Bool progress;
  426.    EState* s;
  427.    if (strm == NULL) return BZ_PARAM_ERROR;
  428.    s = strm->state;
  429.    if (s == NULL) return BZ_PARAM_ERROR;
  430.    if (s->strm != strm) return BZ_PARAM_ERROR;
  431.  
  432.    preswitch:
  433.    switch (s->mode) {
  434.  
  435.       case BZ_M_IDLE:
  436.          return BZ_SEQUENCE_ERROR;
  437.  
  438.       case BZ_M_RUNNING:
  439.          if (action == BZ_RUN) {
  440.             progress = handle_compress ( strm );
  441.             return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
  442.          } 
  443.          else
  444.      if (action == BZ_FLUSH) {
  445.             s->avail_in_expect = strm->avail_in;
  446.             s->mode = BZ_M_FLUSHING;
  447.             goto preswitch;
  448.          }
  449.          else
  450.          if (action == BZ_FINISH) {
  451.             s->avail_in_expect = strm->avail_in;
  452.             s->mode = BZ_M_FINISHING;
  453.             goto preswitch;
  454.          }
  455.          else 
  456.             return BZ_PARAM_ERROR;
  457.  
  458.       case BZ_M_FLUSHING:
  459.          if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
  460.          if (s->avail_in_expect != s->strm->avail_in) 
  461.             return BZ_SEQUENCE_ERROR;
  462.          progress = handle_compress ( strm );
  463.          if (s->avail_in_expect > 0 || !isempty_RL(s) ||
  464.              s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
  465.          s->mode = BZ_M_RUNNING;
  466.          return BZ_RUN_OK;
  467.  
  468.       case BZ_M_FINISHING:
  469.          if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
  470.          if (s->avail_in_expect != s->strm->avail_in) 
  471.             return BZ_SEQUENCE_ERROR;
  472.          progress = handle_compress ( strm );
  473.          if (!progress) return BZ_SEQUENCE_ERROR;
  474.          if (s->avail_in_expect > 0 || !isempty_RL(s) ||
  475.              s->state_out_pos < s->numZ) return BZ_FINISH_OK;
  476.          s->mode = BZ_M_IDLE;
  477.          return BZ_STREAM_END;
  478.    }
  479.    return BZ_OK; /*--not reached--*/
  480. }
  481.  
  482.  
  483. /*---------------------------------------------------*/
  484. int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
  485. {
  486.    EState* s;
  487.    if (strm == NULL) return BZ_PARAM_ERROR;
  488.    s = strm->state;
  489.    if (s == NULL) return BZ_PARAM_ERROR;
  490.    if (s->strm != strm) return BZ_PARAM_ERROR;
  491.  
  492.    if (s->arr1 != NULL) BZFREE(s->arr1);
  493.    if (s->arr2 != NULL) BZFREE(s->arr2);
  494.    if (s->ftab != NULL) BZFREE(s->ftab);
  495.    BZFREE(strm->state);
  496.  
  497.    strm->state = NULL;   
  498.  
  499.    return BZ_OK;
  500. }
  501.  
  502.  
  503. /*---------------------------------------------------*/
  504. /*--- Decompression stuff                         ---*/
  505. /*---------------------------------------------------*/
  506.  
  507. /*---------------------------------------------------*/
  508. int BZ_API(BZ2_bzDecompressInit) 
  509.                      ( bz_stream* strm, 
  510.                        int        verbosity,
  511.                        int        small )
  512. {
  513.    DState* s;
  514.  
  515.    if (!bz_config_ok()) return BZ_CONFIG_ERROR;
  516.  
  517.    if (strm == NULL) return BZ_PARAM_ERROR;
  518.    if (small != 0 && small != 1) return BZ_PARAM_ERROR;
  519.    if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
  520.  
  521.    if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
  522.    if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
  523.  
  524.    s = BZALLOC( sizeof(DState) );
  525.    if (s == NULL) return BZ_MEM_ERROR;
  526.    s->strm                  = strm;
  527.    strm->state              = s;
  528.    s->state                 = BZ_X_MAGIC_1;
  529.    s->bsLive                = 0;
  530.    s->bsBuff                = 0;
  531.    s->calculatedCombinedCRC = 0;
  532.    strm->total_in_lo32      = 0;
  533.    strm->total_in_hi32      = 0;
  534.    strm->total_out_lo32     = 0;
  535.    strm->total_out_hi32     = 0;
  536.    s->smallDecompress       = (Bool)small;
  537.    s->ll4                   = NULL;
  538.    s->ll16                  = NULL;
  539.    s->tt                    = NULL;
  540.    s->currBlockNo           = 0;
  541.    s->verbosity             = verbosity;
  542.  
  543.    return BZ_OK;
  544. }
  545.  
  546.  
  547. /*---------------------------------------------------*/
  548. static
  549. void unRLE_obuf_to_output_FAST ( DState* s )
  550. {
  551.    UChar k1;
  552.  
  553.    if (s->blockRandomised) {
  554.  
  555.       while (True) {
  556.          /* try to finish existing run */
  557.          while (True) {
  558.             if (s->strm->avail_out == 0) return;
  559.             if (s->state_out_len == 0) break;
  560.             *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
  561.             BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
  562.             s->state_out_len--;
  563.             s->strm->next_out++;
  564.             s->strm->avail_out--;
  565.             s->strm->total_out_lo32++;
  566.             if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
  567.          }
  568.    
  569.          /* can a new run be started? */
  570.          if (s->nblock_used == s->save_nblock+1) return;
  571.                
  572.    
  573.          s->state_out_len = 1;
  574.          s->state_out_ch = s->k0;
  575.          BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
  576.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  577.          if (s->nblock_used == s->save_nblock+1) continue;
  578.          if (k1 != s->k0) { s->k0 = k1; continue; };
  579.    
  580.          s->state_out_len = 2;
  581.          BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
  582.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  583.          if (s->nblock_used == s->save_nblock+1) continue;
  584.          if (k1 != s->k0) { s->k0 = k1; continue; };
  585.    
  586.          s->state_out_len = 3;
  587.          BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
  588.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  589.          if (s->nblock_used == s->save_nblock+1) continue;
  590.          if (k1 != s->k0) { s->k0 = k1; continue; };
  591.    
  592.          BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
  593.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  594.          s->state_out_len = ((Int32)k1) + 4;
  595.          BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
  596.          s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
  597.       }
  598.  
  599.    } else {
  600.  
  601.       /* restore */
  602.       UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
  603.       UChar         c_state_out_ch       = s->state_out_ch;
  604.       Int32         c_state_out_len      = s->state_out_len;
  605.       Int32         c_nblock_used        = s->nblock_used;
  606.       Int32         c_k0                 = s->k0;
  607.       UInt32*       c_tt                 = s->tt;
  608.       UInt32        c_tPos               = s->tPos;
  609.       char*         cs_next_out          = s->strm->next_out;
  610.       unsigned int  cs_avail_out         = s->strm->avail_out;
  611.       /* end restore */
  612.  
  613.       UInt32       avail_out_INIT = cs_avail_out;
  614.       Int32        s_save_nblockPP = s->save_nblock+1;
  615.       unsigned int total_out_lo32_old;
  616.  
  617.       while (True) {
  618.  
  619.          /* try to finish existing run */
  620.          if (c_state_out_len > 0) {
  621.             while (True) {
  622.                if (cs_avail_out == 0) goto return_notr;
  623.                if (c_state_out_len == 1) break;
  624.                *( (UChar*)(cs_next_out) ) = c_state_out_ch;
  625.                BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
  626.                c_state_out_len--;
  627.                cs_next_out++;
  628.                cs_avail_out--;
  629.             }
  630.             s_state_out_len_eq_one:
  631.             {
  632.                if (cs_avail_out == 0) { 
  633.                   c_state_out_len = 1; goto return_notr;
  634.                };
  635.                *( (UChar*)(cs_next_out) ) = c_state_out_ch;
  636.                BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
  637.                cs_next_out++;
  638.                cs_avail_out--;
  639.             }
  640.          }   
  641.          /* can a new run be started? */
  642.          if (c_nblock_used == s_save_nblockPP) {
  643.             c_state_out_len = 0; goto return_notr;
  644.          };   
  645.          c_state_out_ch = c_k0;
  646.          BZ_GET_FAST_C(k1); c_nblock_used++;
  647.          if (k1 != c_k0) { 
  648.             c_k0 = k1; goto s_state_out_len_eq_one; 
  649.          };
  650.          if (c_nblock_used == s_save_nblockPP) 
  651.             goto s_state_out_len_eq_one;
  652.    
  653.          c_state_out_len = 2;
  654.          BZ_GET_FAST_C(k1); c_nblock_used++;
  655.          if (c_nblock_used == s_save_nblockPP) continue;
  656.          if (k1 != c_k0) { c_k0 = k1; continue; };
  657.    
  658.          c_state_out_len = 3;
  659.          BZ_GET_FAST_C(k1); c_nblock_used++;
  660.          if (c_nblock_used == s_save_nblockPP) continue;
  661.          if (k1 != c_k0) { c_k0 = k1; continue; };
  662.    
  663.          BZ_GET_FAST_C(k1); c_nblock_used++;
  664.          c_state_out_len = ((Int32)k1) + 4;
  665.          BZ_GET_FAST_C(c_k0); c_nblock_used++;
  666.       }
  667.  
  668.       return_notr:
  669.       total_out_lo32_old = s->strm->total_out_lo32;
  670.       s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
  671.       if (s->strm->total_out_lo32 < total_out_lo32_old)
  672.          s->strm->total_out_hi32++;
  673.  
  674.       /* save */
  675.       s->calculatedBlockCRC = c_calculatedBlockCRC;
  676.       s->state_out_ch       = c_state_out_ch;
  677.       s->state_out_len      = c_state_out_len;
  678.       s->nblock_used        = c_nblock_used;
  679.       s->k0                 = c_k0;
  680.       s->tt                 = c_tt;
  681.       s->tPos               = c_tPos;
  682.       s->strm->next_out     = cs_next_out;
  683.       s->strm->avail_out    = cs_avail_out;
  684.       /* end save */
  685.    }
  686. }
  687.  
  688.  
  689.  
  690. /*---------------------------------------------------*/
  691. __inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
  692. {
  693.    Int32 nb, na, mid;
  694.    nb = 0;
  695.    na = 256;
  696.    do {
  697.       mid = (nb + na) >> 1;
  698.       if (indx >= cftab[mid]) nb = mid; else na = mid;
  699.    }
  700.    while (na - nb != 1);
  701.    return nb;
  702. }
  703.  
  704.  
  705. /*---------------------------------------------------*/
  706. static
  707. void unRLE_obuf_to_output_SMALL ( DState* s )
  708. {
  709.    UChar k1;
  710.  
  711.    if (s->blockRandomised) {
  712.  
  713.       while (True) {
  714.          /* try to finish existing run */
  715.          while (True) {
  716.             if (s->strm->avail_out == 0) return;
  717.             if (s->state_out_len == 0) break;
  718.             *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
  719.             BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
  720.             s->state_out_len--;
  721.             s->strm->next_out++;
  722.             s->strm->avail_out--;
  723.             s->strm->total_out_lo32++;
  724.             if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
  725.          }
  726.    
  727.          /* can a new run be started? */
  728.          if (s->nblock_used == s->save_nblock+1) return;
  729.                
  730.    
  731.          s->state_out_len = 1;
  732.          s->state_out_ch = s->k0;
  733.          BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
  734.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  735.          if (s->nblock_used == s->save_nblock+1) continue;
  736.          if (k1 != s->k0) { s->k0 = k1; continue; };
  737.    
  738.          s->state_out_len = 2;
  739.          BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
  740.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  741.          if (s->nblock_used == s->save_nblock+1) continue;
  742.          if (k1 != s->k0) { s->k0 = k1; continue; };
  743.    
  744.          s->state_out_len = 3;
  745.          BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
  746.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  747.          if (s->nblock_used == s->save_nblock+1) continue;
  748.          if (k1 != s->k0) { s->k0 = k1; continue; };
  749.    
  750.          BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
  751.          k1 ^= BZ_RAND_MASK; s->nblock_used++;
  752.          s->state_out_len = ((Int32)k1) + 4;
  753.          BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
  754.          s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
  755.       }
  756.  
  757.    } else {
  758.  
  759.       while (True) {
  760.          /* try to finish existing run */
  761.          while (True) {
  762.             if (s->strm->avail_out == 0) return;
  763.             if (s->state_out_len == 0) break;
  764.             *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
  765.             BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
  766.             s->state_out_len--;
  767.             s->strm->next_out++;
  768.             s->strm->avail_out--;
  769.             s->strm->total_out_lo32++;
  770.             if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
  771.          }
  772.    
  773.          /* can a new run be started? */
  774.          if (s->nblock_used == s->save_nblock+1) return;
  775.    
  776.          s->state_out_len = 1;
  777.          s->state_out_ch = s->k0;
  778.          BZ_GET_SMALL(k1); s->nblock_used++;
  779.          if (s->nblock_used == s->save_nblock+1) continue;
  780.          if (k1 != s->k0) { s->k0 = k1; continue; };
  781.    
  782.          s->state_out_len = 2;
  783.          BZ_GET_SMALL(k1); s->nblock_used++;
  784.          if (s->nblock_used == s->save_nblock+1) continue;
  785.          if (k1 != s->k0) { s->k0 = k1; continue; };
  786.    
  787.          s->state_out_len = 3;
  788.          BZ_GET_SMALL(k1); s->nblock_used++;
  789.          if (s->nblock_used == s->save_nblock+1) continue;
  790.          if (k1 != s->k0) { s->k0 = k1; continue; };
  791.    
  792.          BZ_GET_SMALL(k1); s->nblock_used++;
  793.          s->state_out_len = ((Int32)k1) + 4;
  794.          BZ_GET_SMALL(s->k0); s->nblock_used++;
  795.       }
  796.  
  797.    }
  798. }
  799.  
  800.  
  801. /*---------------------------------------------------*/
  802. int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
  803. {
  804.    DState* s;
  805.    if (strm == NULL) return BZ_PARAM_ERROR;
  806.    s = strm->state;
  807.    if (s == NULL) return BZ_PARAM_ERROR;
  808.    if (s->strm != strm) return BZ_PARAM_ERROR;
  809.  
  810.    while (True) {
  811.       if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
  812.       if (s->state == BZ_X_OUTPUT) {
  813.          if (s->smallDecompress)
  814.             unRLE_obuf_to_output_SMALL ( s ); else
  815.             unRLE_obuf_to_output_FAST  ( s );
  816.          if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
  817.             BZ_FINALISE_CRC ( s->calculatedBlockCRC );
  818.             if (s->verbosity >= 3) 
  819.                VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC, 
  820.                           s->calculatedBlockCRC );
  821.             if (s->verbosity >= 2) VPrintf0 ( "]" );
  822.             if (s->calculatedBlockCRC != s->storedBlockCRC)
  823.                return BZ_DATA_ERROR;
  824.             s->calculatedCombinedCRC 
  825.                = (s->calculatedCombinedCRC << 1) | 
  826.                     (s->calculatedCombinedCRC >> 31);
  827.             s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
  828.             s->state = BZ_X_BLKHDR_1;
  829.          } else {
  830.             return BZ_OK;
  831.          }
  832.       }
  833.       if (s->state >= BZ_X_MAGIC_1) {
  834.          Int32 r = BZ2_decompress ( s );
  835.          if (r == BZ_STREAM_END) {
  836.             if (s->verbosity >= 3)
  837.                VPrintf2 ( "\n    combined CRCs: stored = 0x%x, computed = 0x%x", 
  838.                           s->storedCombinedCRC, s->calculatedCombinedCRC );
  839.             if (s->calculatedCombinedCRC != s->storedCombinedCRC)
  840.                return BZ_DATA_ERROR;
  841.             return r;
  842.          }
  843.          if (s->state != BZ_X_OUTPUT) return r;
  844.       }
  845.    }
  846.  
  847.    AssertH ( 0, 6001 );
  848.  
  849.    return 0;  /*NOTREACHED*/
  850. }
  851.  
  852.  
  853. /*---------------------------------------------------*/
  854. int BZ_API(BZ2_bzDecompressEnd)  ( bz_stream *strm )
  855. {
  856.    DState* s;
  857.    if (strm == NULL) return BZ_PARAM_ERROR;
  858.    s = strm->state;
  859.    if (s == NULL) return BZ_PARAM_ERROR;
  860.    if (s->strm != strm) return BZ_PARAM_ERROR;
  861.  
  862.    if (s->tt   != NULL) BZFREE(s->tt);
  863.    if (s->ll16 != NULL) BZFREE(s->ll16);
  864.    if (s->ll4  != NULL) BZFREE(s->ll4);
  865.  
  866.    BZFREE(strm->state);
  867.    strm->state = NULL;
  868.  
  869.    return BZ_OK;
  870. }
  871.  
  872.  
  873. #ifndef BZ_NO_STDIO
  874. /*---------------------------------------------------*/
  875. /*--- File I/O stuff                              ---*/
  876. /*---------------------------------------------------*/
  877.  
  878. #define BZ_SETERR(eee)                    \
  879. {                                         \
  880.    if (bzerror != NULL) *bzerror = eee;   \
  881.    if (bzf != NULL) bzf->lastErr = eee;   \
  882. }
  883.  
  884. typedef 
  885.    struct {
  886.       FILE*     handle;
  887.       Char      buf[BZ_MAX_UNUSED];
  888.       Int32     bufN;
  889.       Bool      writing;
  890.       bz_stream strm;
  891.       Int32     lastErr;
  892.       Bool      initialisedOk;
  893.    }
  894.    bzFile;
  895.  
  896.  
  897. /*---------------------------------------------*/
  898. static Bool myfeof ( FILE* f )
  899. {
  900.    Int32 c = fgetc ( f );
  901.    if (c == EOF) return True;
  902.    ungetc ( c, f );
  903.    return False;
  904. }
  905.  
  906.  
  907. /*---------------------------------------------------*/
  908. BZFILE* BZ_API(BZ2_bzWriteOpen) 
  909.                     ( int*  bzerror,      
  910.                       FILE* f, 
  911.                       int   blockSize100k, 
  912.                       int   verbosity,
  913.                       int   workFactor )
  914. {
  915.    Int32   ret;
  916.    bzFile* bzf = NULL;
  917.  
  918.    BZ_SETERR(BZ_OK);
  919.  
  920.    if (f == NULL ||
  921.        (blockSize100k < 1 || blockSize100k > 9) ||
  922.        (workFactor < 0 || workFactor > 250) ||
  923.        (verbosity < 0 || verbosity > 4))
  924.       { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
  925.  
  926.    if (ferror(f))
  927.       { BZ_SETERR(BZ_IO_ERROR); return NULL; };
  928.  
  929.    bzf = malloc ( sizeof(bzFile) );
  930.    if (bzf == NULL)
  931.       { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
  932.  
  933.    BZ_SETERR(BZ_OK);
  934.    bzf->initialisedOk = False;
  935.    bzf->bufN          = 0;
  936.    bzf->handle        = f;
  937.    bzf->writing       = True;
  938.    bzf->strm.bzalloc  = NULL;
  939.    bzf->strm.bzfree   = NULL;
  940.    bzf->strm.opaque   = NULL;
  941.  
  942.    if (workFactor == 0) workFactor = 30;
  943.    ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, 
  944.                               verbosity, workFactor );
  945.    if (ret != BZ_OK)
  946.       { BZ_SETERR(ret); free(bzf); return NULL; };
  947.  
  948.    bzf->strm.avail_in = 0;
  949.    bzf->initialisedOk = True;
  950.    return bzf;   
  951. }
  952.  
  953.  
  954.  
  955. /*---------------------------------------------------*/
  956. void BZ_API(BZ2_bzWrite)
  957.              ( int*    bzerror, 
  958.                BZFILE* b, 
  959.                void*   buf, 
  960.                int     len )
  961. {
  962.    Int32 n, n2, ret;
  963.    bzFile* bzf = (bzFile*)b;
  964.  
  965.    BZ_SETERR(BZ_OK);
  966.    if (bzf == NULL || buf == NULL || len < 0)
  967.       { BZ_SETERR(BZ_PARAM_ERROR); return; };
  968.    if (!(bzf->writing))
  969.       { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
  970.    if (ferror(bzf->handle))
  971.       { BZ_SETERR(BZ_IO_ERROR); return; };
  972.  
  973.    if (len == 0)
  974.       { BZ_SETERR(BZ_OK); return; };
  975.  
  976.    bzf->strm.avail_in = len;
  977.    bzf->strm.next_in  = buf;
  978.  
  979.    while (True) {
  980.       bzf->strm.avail_out = BZ_MAX_UNUSED;
  981.       bzf->strm.next_out = bzf->buf;
  982.       ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
  983.       if (ret != BZ_RUN_OK)
  984.          { BZ_SETERR(ret); return; };
  985.  
  986.       if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
  987.          n = BZ_MAX_UNUSED - bzf->strm.avail_out;
  988.          n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
  989.                        n, bzf->handle );
  990.          if (n != n2 || ferror(bzf->handle))
  991.             { BZ_SETERR(BZ_IO_ERROR); return; };
  992.       }
  993.  
  994.       if (bzf->strm.avail_in == 0)
  995.          { BZ_SETERR(BZ_OK); return; };
  996.    }
  997. }
  998.  
  999.  
  1000. /*---------------------------------------------------*/
  1001. void BZ_API(BZ2_bzWriteClose)
  1002.                   ( int*          bzerror, 
  1003.                     BZFILE*       b, 
  1004.                     int           abandon,
  1005.                     unsigned int* nbytes_in,
  1006.                     unsigned int* nbytes_out )
  1007. {
  1008.    BZ2_bzWriteClose64 ( bzerror, b, abandon, 
  1009.                         nbytes_in, NULL, nbytes_out, NULL );
  1010. }
  1011.  
  1012.  
  1013. void BZ_API(BZ2_bzWriteClose64)
  1014.                   ( int*          bzerror, 
  1015.                     BZFILE*       b, 
  1016.                     int           abandon,
  1017.                     unsigned int* nbytes_in_lo32,
  1018.                     unsigned int* nbytes_in_hi32,
  1019.                     unsigned int* nbytes_out_lo32,
  1020.                     unsigned int* nbytes_out_hi32 )
  1021. {
  1022.    Int32   n, n2, ret;
  1023.    bzFile* bzf = (bzFile*)b;
  1024.  
  1025.    if (bzf == NULL)
  1026.       { BZ_SETERR(BZ_OK); return; };
  1027.    if (!(bzf->writing))
  1028.       { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
  1029.    if (ferror(bzf->handle))
  1030.       { BZ_SETERR(BZ_IO_ERROR); return; };
  1031.  
  1032.    if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
  1033.    if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
  1034.    if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
  1035.    if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
  1036.  
  1037.    if ((!abandon) && bzf->lastErr == BZ_OK) {
  1038.       while (True) {
  1039.          bzf->strm.avail_out = BZ_MAX_UNUSED;
  1040.          bzf->strm.next_out = bzf->buf;
  1041.          ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
  1042.          if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
  1043.             { BZ_SETERR(ret); return; };
  1044.  
  1045.          if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
  1046.             n = BZ_MAX_UNUSED - bzf->strm.avail_out;
  1047.             n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
  1048.                           n, bzf->handle );
  1049.             if (n != n2 || ferror(bzf->handle))
  1050.                { BZ_SETERR(BZ_IO_ERROR); return; };
  1051.          }
  1052.  
  1053.          if (ret == BZ_STREAM_END) break;
  1054.       }
  1055.    }
  1056.  
  1057.    if ( !abandon && !ferror ( bzf->handle ) ) {
  1058.       fflush ( bzf->handle );
  1059.       if (ferror(bzf->handle))
  1060.          { BZ_SETERR(BZ_IO_ERROR); return; };
  1061.    }
  1062.  
  1063.    if (nbytes_in_lo32 != NULL)
  1064.       *nbytes_in_lo32 = bzf->strm.total_in_lo32;
  1065.    if (nbytes_in_hi32 != NULL)
  1066.       *nbytes_in_hi32 = bzf->strm.total_in_hi32;
  1067.    if (nbytes_out_lo32 != NULL)
  1068.       *nbytes_out_lo32 = bzf->strm.total_out_lo32;
  1069.    if (nbytes_out_hi32 != NULL)
  1070.       *nbytes_out_hi32 = bzf->strm.total_out_hi32;
  1071.  
  1072.    BZ_SETERR(BZ_OK);
  1073.    BZ2_bzCompressEnd ( &(bzf->strm) );
  1074.    free ( bzf );
  1075. }
  1076.  
  1077.  
  1078. /*---------------------------------------------------*/
  1079. BZFILE* BZ_API(BZ2_bzReadOpen) 
  1080.                    ( int*  bzerror, 
  1081.                      FILE* f, 
  1082.                      int   verbosity,
  1083.                      int   small,
  1084.                      void* unused,
  1085.                      int   nUnused )
  1086. {
  1087.    bzFile* bzf = NULL;
  1088.    int     ret;
  1089.  
  1090.    BZ_SETERR(BZ_OK);
  1091.  
  1092.    if (f == NULL || 
  1093.        (small != 0 && small != 1) ||
  1094.        (verbosity < 0 || verbosity > 4) ||
  1095.        (unused == NULL && nUnused != 0) ||
  1096.        (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
  1097.       { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
  1098.  
  1099.    if (ferror(f))
  1100.       { BZ_SETERR(BZ_IO_ERROR); return NULL; };
  1101.  
  1102.    bzf = malloc ( sizeof(bzFile) );
  1103.    if (bzf == NULL) 
  1104.       { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
  1105.  
  1106.    BZ_SETERR(BZ_OK);
  1107.  
  1108.    bzf->initialisedOk = False;
  1109.    bzf->handle        = f;
  1110.    bzf->bufN          = 0;
  1111.    bzf->writing       = False;
  1112.    bzf->strm.bzalloc  = NULL;
  1113.    bzf->strm.bzfree   = NULL;
  1114.    bzf->strm.opaque   = NULL;
  1115.    
  1116.    while (nUnused > 0) {
  1117.       bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
  1118.       unused = ((void*)( 1 + ((UChar*)(unused))  ));
  1119.       nUnused--;
  1120.    }
  1121.  
  1122.    ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
  1123.    if (ret != BZ_OK)
  1124.       { BZ_SETERR(ret); free(bzf); return NULL; };
  1125.  
  1126.    bzf->strm.avail_in = bzf->bufN;
  1127.    bzf->strm.next_in  = bzf->buf;
  1128.  
  1129.    bzf->initialisedOk = True;
  1130.    return bzf;   
  1131. }
  1132.  
  1133.  
  1134. /*---------------------------------------------------*/
  1135. void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
  1136. {
  1137.    bzFile* bzf = (bzFile*)b;
  1138.  
  1139.    BZ_SETERR(BZ_OK);
  1140.    if (bzf == NULL)
  1141.       { BZ_SETERR(BZ_OK); return; };
  1142.  
  1143.    if (bzf->writing)
  1144.       { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
  1145.  
  1146.    if (bzf->initialisedOk)
  1147.       (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
  1148.    free ( bzf );
  1149. }
  1150.  
  1151.  
  1152. /*---------------------------------------------------*/
  1153. int BZ_API(BZ2_bzRead) 
  1154.            ( int*    bzerror, 
  1155.              BZFILE* b, 
  1156.              void*   buf, 
  1157.              int     len )
  1158. {
  1159.    Int32   n, ret;
  1160.    bzFile* bzf = (bzFile*)b;
  1161.  
  1162.    BZ_SETERR(BZ_OK);
  1163.  
  1164.    if (bzf == NULL || buf == NULL || len < 0)
  1165.       { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
  1166.  
  1167.    if (bzf->writing)
  1168.       { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
  1169.  
  1170.    if (len == 0)
  1171.       { BZ_SETERR(BZ_OK); return 0; };
  1172.  
  1173.    bzf->strm.avail_out = len;
  1174.    bzf->strm.next_out = buf;
  1175.  
  1176.    while (True) {
  1177.  
  1178.       if (ferror(bzf->handle)) 
  1179.          { BZ_SETERR(BZ_IO_ERROR); return 0; };
  1180.  
  1181.       if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
  1182.          n = fread ( bzf->buf, sizeof(UChar), 
  1183.                      BZ_MAX_UNUSED, bzf->handle );
  1184.          if (ferror(bzf->handle))
  1185.             { BZ_SETERR(BZ_IO_ERROR); return 0; };
  1186.          bzf->bufN = n;
  1187.          bzf->strm.avail_in = bzf->bufN;
  1188.          bzf->strm.next_in = bzf->buf;
  1189.       }
  1190.  
  1191.       ret = BZ2_bzDecompress ( &(bzf->strm) );
  1192.  
  1193.       if (ret != BZ_OK && ret != BZ_STREAM_END)
  1194.          { BZ_SETERR(ret); return 0; };
  1195.  
  1196.       if (ret == BZ_OK && myfeof(bzf->handle) && 
  1197.           bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
  1198.          { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
  1199.  
  1200.       if (ret == BZ_STREAM_END)
  1201.          { BZ_SETERR(BZ_STREAM_END);
  1202.            return len - bzf->strm.avail_out; };
  1203.       if (bzf->strm.avail_out == 0)
  1204.          { BZ_SETERR(BZ_OK); return len; };
  1205.       
  1206.    }
  1207.  
  1208.    return 0; /*not reached*/
  1209. }
  1210.  
  1211.  
  1212. /*---------------------------------------------------*/
  1213. void BZ_API(BZ2_bzReadGetUnused) 
  1214.                      ( int*    bzerror, 
  1215.                        BZFILE* b, 
  1216.                        void**  unused, 
  1217.                        int*    nUnused )
  1218. {
  1219.    bzFile* bzf = (bzFile*)b;
  1220.    if (bzf == NULL)
  1221.       { BZ_SETERR(BZ_PARAM_ERROR); return; };
  1222.    if (bzf->lastErr != BZ_STREAM_END)
  1223.       { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
  1224.    if (unused == NULL || nUnused == NULL)
  1225.       { BZ_SETERR(BZ_PARAM_ERROR); return; };
  1226.  
  1227.    BZ_SETERR(BZ_OK);
  1228.    *nUnused = bzf->strm.avail_in;
  1229.    *unused = bzf->strm.next_in;
  1230. }
  1231. #endif
  1232.  
  1233.  
  1234. /*---------------------------------------------------*/
  1235. /*--- Misc convenience stuff                      ---*/
  1236. /*---------------------------------------------------*/
  1237.  
  1238. /*---------------------------------------------------*/
  1239. int BZ_API(BZ2_bzBuffToBuffCompress) 
  1240.                          ( char*         dest, 
  1241.                            unsigned int* destLen,
  1242.                            char*         source, 
  1243.                            unsigned int  sourceLen,
  1244.                            int           blockSize100k, 
  1245.                            int           verbosity, 
  1246.                            int           workFactor )
  1247. {
  1248.    bz_stream strm;
  1249.    int ret;
  1250.  
  1251.    if (dest == NULL || destLen == NULL || 
  1252.        source == NULL ||
  1253.        blockSize100k < 1 || blockSize100k > 9 ||
  1254.        verbosity < 0 || verbosity > 4 ||
  1255.        workFactor < 0 || workFactor > 250) 
  1256.       return BZ_PARAM_ERROR;
  1257.  
  1258.    if (workFactor == 0) workFactor = 30;
  1259.    strm.bzalloc = NULL;
  1260.    strm.bzfree = NULL;
  1261.    strm.opaque = NULL;
  1262.    ret = BZ2_bzCompressInit ( &strm, blockSize100k, 
  1263.                               verbosity, workFactor );
  1264.    if (ret != BZ_OK) return ret;
  1265.  
  1266.    strm.next_in = source;
  1267.    strm.next_out = dest;
  1268.    strm.avail_in = sourceLen;
  1269.    strm.avail_out = *destLen;
  1270.  
  1271.    ret = BZ2_bzCompress ( &strm, BZ_FINISH );
  1272.    if (ret == BZ_FINISH_OK) goto output_overflow;
  1273.    if (ret != BZ_STREAM_END) goto errhandler;
  1274.  
  1275.    /* normal termination */
  1276.    *destLen -= strm.avail_out;   
  1277.    BZ2_bzCompressEnd ( &strm );
  1278.    return BZ_OK;
  1279.  
  1280.    output_overflow:
  1281.    BZ2_bzCompressEnd ( &strm );
  1282.    return BZ_OUTBUFF_FULL;
  1283.  
  1284.    errhandler:
  1285.    BZ2_bzCompressEnd ( &strm );
  1286.    return ret;
  1287. }
  1288.  
  1289.  
  1290. /*---------------------------------------------------*/
  1291. int BZ_API(BZ2_bzBuffToBuffDecompress) 
  1292.                            ( char*         dest, 
  1293.                              unsigned int* destLen,
  1294.                              char*         source, 
  1295.                              unsigned int  sourceLen,
  1296.                              int           small,
  1297.                              int           verbosity )
  1298. {
  1299.    bz_stream strm;
  1300.    int ret;
  1301.  
  1302.    if (dest == NULL || destLen == NULL || 
  1303.        source == NULL ||
  1304.        (small != 0 && small != 1) ||
  1305.        verbosity < 0 || verbosity > 4) 
  1306.           return BZ_PARAM_ERROR;
  1307.  
  1308.    strm.bzalloc = NULL;
  1309.    strm.bzfree = NULL;
  1310.    strm.opaque = NULL;
  1311.    ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
  1312.    if (ret != BZ_OK) return ret;
  1313.  
  1314.    strm.next_in = source;
  1315.    strm.next_out = dest;
  1316.    strm.avail_in = sourceLen;
  1317.    strm.avail_out = *destLen;
  1318.  
  1319.    ret = BZ2_bzDecompress ( &strm );
  1320.    if (ret == BZ_OK) goto output_overflow_or_eof;
  1321.    if (ret != BZ_STREAM_END) goto errhandler;
  1322.  
  1323.    /* normal termination */
  1324.    *destLen -= strm.avail_out;
  1325.    BZ2_bzDecompressEnd ( &strm );
  1326.    return BZ_OK;
  1327.  
  1328.    output_overflow_or_eof:
  1329.    if (strm.avail_out > 0) {
  1330.       BZ2_bzDecompressEnd ( &strm );
  1331.       return BZ_UNEXPECTED_EOF;
  1332.    } else {
  1333.       BZ2_bzDecompressEnd ( &strm );
  1334.       return BZ_OUTBUFF_FULL;
  1335.    };      
  1336.  
  1337.    errhandler:
  1338.    BZ2_bzDecompressEnd ( &strm );
  1339.    return ret; 
  1340. }
  1341.  
  1342.  
  1343. /*---------------------------------------------------*/
  1344. /*--
  1345.    Code contributed by Yoshioka Tsuneo
  1346.    (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
  1347.    to support better zlib compatibility.
  1348.    This code is not _officially_ part of libbzip2 (yet);
  1349.    I haven't tested it, documented it, or considered the
  1350.    threading-safeness of it.
  1351.    If this code breaks, please contact both Yoshioka and me.
  1352. --*/
  1353. /*---------------------------------------------------*/
  1354.  
  1355. /*---------------------------------------------------*/
  1356. /*--
  1357.    return version like "0.9.0c".
  1358. --*/
  1359. const char * BZ_API(BZ2_bzlibVersion)(void)
  1360. {
  1361.    return BZ_VERSION;
  1362. }
  1363.  
  1364.  
  1365. #ifndef BZ_NO_STDIO
  1366. /*---------------------------------------------------*/
  1367.  
  1368. #if defined(_WIN32) || defined(OS2) || defined(MSDOS)
  1369. #   include <fcntl.h>
  1370. #   include <io.h>
  1371. #   define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
  1372. #else
  1373. #   define SET_BINARY_MODE(file)
  1374. #endif
  1375. static
  1376. BZFILE * bzopen_or_bzdopen
  1377.                ( const char *path,   /* no use when bzdopen */
  1378.                  int fd,             /* no use when bzdopen */
  1379.                  const char *mode,
  1380.                  int open_mode)      /* bzopen: 0, bzdopen:1 */
  1381. {
  1382.    int    bzerr;
  1383.    char   unused[BZ_MAX_UNUSED];
  1384.    int    blockSize100k = 9;
  1385.    int    writing       = 0;
  1386.    char   mode2[10]     = "";
  1387.    FILE   *fp           = NULL;
  1388.    BZFILE *bzfp         = NULL;
  1389.    int    verbosity     = 0;
  1390.    int    workFactor    = 30;
  1391.    int    smallMode     = 0;
  1392.    int    nUnused       = 0; 
  1393.  
  1394.    if (mode == NULL) return NULL;
  1395.    while (*mode) {
  1396.       switch (*mode) {
  1397.       case 'r':
  1398.          writing = 0; break;
  1399.       case 'w':
  1400.          writing = 1; break;
  1401.       case 's':
  1402.          smallMode = 1; break;
  1403.       default:
  1404.          if (isdigit((int)(*mode))) {
  1405.             blockSize100k = *mode-'0';
  1406.          }
  1407.       }
  1408.       mode++;
  1409.    }
  1410.    strcat(mode2, writing ? "w" : "r" );
  1411.    strcat(mode2,"b");   /* binary mode */
  1412.  
  1413.    if (open_mode==0) {
  1414.       if (path==NULL || strcmp(path,"")==0) {
  1415.         fp = (writing ? stdout : stdin);
  1416.         SET_BINARY_MODE(fp);
  1417.       } else {
  1418.         fp = fopen(path,mode2);
  1419.       }
  1420.    } else {
  1421. #ifdef BZ_STRICT_ANSI
  1422.       fp = NULL;
  1423. #else
  1424.       fp = fdopen(fd,mode2);
  1425. #endif
  1426.    }
  1427.    if (fp == NULL) return NULL;
  1428.  
  1429.    if (writing) {
  1430.       /* Guard against total chaos and anarchy -- JRS */
  1431.       if (blockSize100k < 1) blockSize100k = 1;
  1432.       if (blockSize100k > 9) blockSize100k = 9; 
  1433.       bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
  1434.                              verbosity,workFactor);
  1435.    } else {
  1436.       bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
  1437.                             unused,nUnused);
  1438.    }
  1439.    if (bzfp == NULL) {
  1440.       if (fp != stdin && fp != stdout) fclose(fp);
  1441.       return NULL;
  1442.    }
  1443.    return bzfp;
  1444. }
  1445.  
  1446.  
  1447. /*---------------------------------------------------*/
  1448. /*--
  1449.    open file for read or write.
  1450.       ex) bzopen("file","w9")
  1451.       case path="" or NULL => use stdin or stdout.
  1452. --*/
  1453. BZFILE * BZ_API(BZ2_bzopen)
  1454.                ( const char *path,
  1455.                  const char *mode )
  1456. {
  1457.    return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
  1458. }
  1459.  
  1460.  
  1461. /*---------------------------------------------------*/
  1462. BZFILE * BZ_API(BZ2_bzdopen)
  1463.                ( int fd,
  1464.                  const char *mode )
  1465. {
  1466.    return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
  1467. }
  1468.  
  1469.  
  1470. /*---------------------------------------------------*/
  1471. int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
  1472. {
  1473.    int bzerr, nread;
  1474.    if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
  1475.    nread = BZ2_bzRead(&bzerr,b,buf,len);
  1476.    if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
  1477.       return nread;
  1478.    } else {
  1479.       return -1;
  1480.    }
  1481. }
  1482.  
  1483.  
  1484. /*---------------------------------------------------*/
  1485. int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
  1486. {
  1487.    int bzerr;
  1488.  
  1489.    BZ2_bzWrite(&bzerr,b,buf,len);
  1490.    if(bzerr == BZ_OK){
  1491.       return len;
  1492.    }else{
  1493.       return -1;
  1494.    }
  1495. }
  1496.  
  1497.  
  1498. /*---------------------------------------------------*/
  1499. int BZ_API(BZ2_bzflush) (BZFILE *b)
  1500. {
  1501.    /* do nothing now... */
  1502.    return 0;
  1503. }
  1504.  
  1505.  
  1506. /*---------------------------------------------------*/
  1507. void BZ_API(BZ2_bzclose) (BZFILE* b)
  1508. {
  1509.    int bzerr;
  1510.    FILE *fp = ((bzFile *)b)->handle;
  1511.    
  1512.    if (b==NULL) {return;}
  1513.    if(((bzFile*)b)->writing){
  1514.       BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
  1515.       if(bzerr != BZ_OK){
  1516.          BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
  1517.       }
  1518.    }else{
  1519.       BZ2_bzReadClose(&bzerr,b);
  1520.    }
  1521.    if(fp!=stdin && fp!=stdout){
  1522.       fclose(fp);
  1523.    }
  1524. }
  1525.  
  1526.  
  1527. /*---------------------------------------------------*/
  1528. /*--
  1529.    return last error code 
  1530. --*/
  1531. static char *bzerrorstrings[] = {
  1532.        "OK"
  1533.       ,"SEQUENCE_ERROR"
  1534.       ,"PARAM_ERROR"
  1535.       ,"MEM_ERROR"
  1536.       ,"DATA_ERROR"
  1537.       ,"DATA_ERROR_MAGIC"
  1538.       ,"IO_ERROR"
  1539.       ,"UNEXPECTED_EOF"
  1540.       ,"OUTBUFF_FULL"
  1541.       ,"CONFIG_ERROR"
  1542.       ,"???"   /* for future */
  1543.       ,"???"   /* for future */
  1544.       ,"???"   /* for future */
  1545.       ,"???"   /* for future */
  1546.       ,"???"   /* for future */
  1547.       ,"???"   /* for future */
  1548. };
  1549.  
  1550.  
  1551. const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
  1552. {
  1553.    int err = ((bzFile *)b)->lastErr;
  1554.  
  1555.    if(err>0) err = 0;
  1556.    *errnum = err;
  1557.    return bzerrorstrings[err*-1];
  1558. }
  1559. #endif
  1560.  
  1561.  
  1562. /*-------------------------------------------------------------*/
  1563. /*--- end                                           bzlib.c ---*/
  1564. /*-------------------------------------------------------------*/
  1565.